Bhaskar Chandra Kandpal

Bhaskar Chandra KandpalAssociate Professor

Professional Qualifications

  • B.Tech : Mechanical Engineering.
  • M.Tech : Mechanical Engineering.
  • Ph.D : Mechanical Engineering.

Teaching Experience

17+ years of teaching as well as industrial experience.

Subject of Interest

Material Science, Production Engineering, Machine Design, Machine drawing, Mechatronics, PMTD, NDT, Workshop Practices,Foundry technology, Mechatronics.

Academic Achievements

Patients: An IOT Enabled Pothole Detection and Road safety system Application NO- 202311073616A.

International Publication:

  1. Bhaskar Chandra Kandpal et al., “Development and mechanical characterization of LM6/Al2O3 /SiC/Graphite metal matrix composites using stir casting , Advances in Materials and Processong Technologies( Taylor and Francis , ESCI) DOI: 10.1080/2374068X.2022.2116883.

  2. Bhaskar Chandra Kandpal, Jatinder Kumar and Hari Singh, “Optimization and characterization of EDM of AA6061/10%Al2O3 AMMC using Taguchi’s approach and utility concept” Production and Manufacturing Research, Volume5, No.1, pp.351-370, 2017 (ESCI JOURNAL, Taylor and Francis).

  3. Bhaskar Chandra Kandpal et al., “Analyzing ballistic impact of bullet over laminated test specimen, Materials Today (Elsevier, SCOPUS INDEXED)

  4. Bhaskar Chandra Kandpal et al., “Analyzing ballistic impact of bullet over laminated test specimen, Materials Today (Elsevier, SCOPUS INDEXED)

  5. Bhaskar Chandra Kandpal et al., “Analyzing the microstructure and mechanical properties in LM6 Aluminium casting in sand casting process , Volume 62, Part 6, 2022, pp 3155-3161 , Materials Today (Elsevier, SCOPUS INDEXED)

  6. Bhaskar Chandra Kandpal et al., “Stir casting technology for magnesium-based metal matrix composites for bone implants - A Review, Volume 62, Part 6, 2022, pp 4519-4525, Materials Today (Elsevier, SCOPUS INDEXED)

  7. Bhaskar Chandra Kandpal et al., “Study of Microstructure, Mechanical and Fracture Properties of Bagasse Ash Powder Strengthened Aluminium Matrix Composites, 2022 (Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020), Lecture Notes on Multidisciplinary Industrial Engineering. Springer ( SCOPUS INDEXED)

  8. Bhaskar Chandra Kandpal et al., “ Structural and FEM analysis of heat treatment effects on mild steel, Volume 46, Part 20, 2021, pp 11064-11071 Materials Today (Elsevier, SCOPUS INDEXED)

  9. Bhaskar Chandra Kandpal et al.,“ Effect of industrial/ agricultural waste materials as reinforcement on properties of metal matrix composites, Volume 46, Part 20, 2021, pp 10736-10740 Materials Today (Elsevier, SCOPUS INDEXED)

  10. Bhaskar Chandra Kandpal et al., “ Experimental study of foundry defects in Aluminium castings for quality improvement of casting, Volume 46, Part 20, 2021, Pages 10702-10706 Materials Today (Elsevier, SCOPUS INDEXED)

  11. Bhaskar Chandra Kandpal et al., “ Synthesis and mechanical characterization of biomass fly ash strengthened aluminium matrix composites, Materials Today, pp 266-272, 2020 (Elsevier, SCOPUS INDEXED)

  12. Bhaskar Chandra Kandpal et al.,“ To study the effect of drilling process parameters on glass fiber reinforced composite Materials Today, pp 2333-2336, 2020 (Elsevier, SCOPUS INDEXED)

  13. Bhaskar Chandra Kandpal et al., “Machining response in turning stir cast alumininum alloy based metal matrix composite” Materials Today, pp 2619–2624, 2019 (Elsevier, SCOPUS INDEXED)

  14. Machining of aluminium metal matrix composites with electrical discharge machining – A Review” Materials Today, pp 1665- 1671, 2015(Elsevier, SCOPUS INDEXED)

  15. Bhaskar Chandra Kandpal, Jatinder Kumar and Hari Singh, “Fabrication and characterisation of Al2O3/aluminium alloy 6061 composites fabricated by Stir casting”, Materials Today, pp. 2783–2792, 2017( Elsevier ,SCOPUS INDEXED)

  16. Bhaskar Chandra Kandpal, Jatinder Kumar and Hari Singh, “Investigations into electrical discharge machining of fabricated AA 6061/10% Al2O3 aluminium-based metal matrix composite using OFAT approach”, Int. J. Automotive Composites, Volume 3, pp. 29-43, 2017( Inderscience, SCOPUS INDEXED).

  17. Bhaskar Chandra Kandpal, Jatinder Kumar and Hari Singh, “Manufacturing and technological challenges in Stir casting of metal matrix composites”, Materials today, 5, pp.5-10, 2018 (Elsevier, SCOPUS INDEXED)

  18. Bhaskar Chandra Kandpal, Jatinder Kumar and Hari Singh, “ Optimization of Process Parameters Of Electrical Discharge Machining Of Fabricated AA 6061/ 10% Al2 O3 Aluminium Based Metal Matrix Composite,, Materials Today,5,pp. 4413-4420, 2018 (Elsevier, SCOPUS INDEXED).

  1. Bhaskar Chandra Kandpal, Jatinder Kumar, Hari Singh, Optimization of electrical discharge machining AA6061/ 10 %Al2O3 composite using Taguchi optimization technique , Materials Today,5,pp. 18946-18955 ,2018 (Elsevier, SCOPUS INDEXED)

  2. Bhaskar Chandra Kandpal ,et al., Fabrication and characterization of Glass Fiber/SiC Reinforced Polymer composite , International Journal of Applied Engineering Research ISSN 0973-4562 Volume 13, Number 6 (2018) pp. 171-176.

  3. Bhaskar Chandra Kandpal, Jatinder Kumar and Hari Singh, “A review on emerging areas of research in electrical discharge machining” International journal of advanced engineering technology (IJAET), ISSN 0976-3945, Volume II, Issue III, pp. 1-9, July –September, 2011.

  4. Bhaskar Chandra Kandpal, Jatinder Kumar and Hari Singh, “Manufacturing of AMMC using stir casting process and testing its mechanical properties” International journal of advanced engineering technology(IJAET), ISSN 0976-3945, Volume IV, Issue III, July –September, 2013, pp. 26-29.

  5. Bhaskar Chandra Kandpal, Jatinder Kumar and Hari Singh, “ Production technologies of metal matrix composites – A Review” International Journal of Research in Mechanical Engineering & Technology(IJRMET), Vol. 4, Issue 2, Spl.- 2 May - October 2014, pp. 27-32.

  6. Bhaskar Chandra Kandpal, Jatinder Kumar and Hari Singh , “ Production and testing of AA6061/Al2O3particulate reinforced composite by stir casting method”, International journal of scientific research (IJSR),volume 4, Issue 10, Oct. - Dec., 2015.

Consultancy Provided:

Project Name- Resistance to Human impact from BIRKAN ENGINEERING INDUSTRIES PVT. LTD of Rs 2 Lakh in year 2021 was completed.

Areas of Interest:

Production Engineering