Teaching Experience

Subject of Interest

Academic Achievements

• L. Kumar, Q. Tanveer, V. Kumar, M. Javaid, and A. Haleem, “Developing low cost 3 D printer,” Int. J. Appl. Sci. Eng. Res., vol. 5, no. 6, pp. 433–447, 2016, doi: 10.6088/ijaser.05042. >
• L. Kumar, A. Haleem, M. Javaid, Q. Tanveer, V. Kumar, and M. Shuaib, “Rapid Manufacturing: Classification and Recent Development,” Int. J. Adv. Eng. Res. Sci., vol. 4, no. 3, pp. 29–40, 2017, doi: 10.22161/ijaers.4.3.5.
• L. Kumar, M. Shuaib, Q. Tanveer, V. Kumar, M. Javaid, and A. Haleem, “3 D scanner integration with product development,” Int. J. Eng. Technol., vol. 7, no. 2.13, p. 220, 2018, doi: 10.14419/ijet.v7i2.13.11690.
• M. Q. Tanveer, M. Suhaib, and A. Haleem, “Geometrical Benchmarking evaluation of ProJet 3D printer using proposed simplified 3D Artifact,” Eng. Res. Express, vol. 1, no. 2, p. 025037, Nov. 2019, doi: 10.1088/2631-8695/ab577b.
• M. Q. Tanveer, A. Haleem, and M. Suhaib, “Effect of variable infill density on mechanical behaviour of 3-D printed PLA specimen: an experimental investigation,” SN Appl. Sci., vol. 1, no. 12, p. 1701, Dec. 2019, doi: 10.1007/s42452-019-1744-1.
• M. Q. Tanveer, M. Suhaib, and A. Haleem, “A New 3D Benchmarking Artifact to Evaluate Dimensional Accuracy and Geometric Tolerancing of Additive Manufacturing Technique,” in Lecture Notes in Mechanical Engineering, 2020, pp. 261–273.
• M. Q. Tanveer, M. Suhaib, and A. Haleem, “A Retrospective Investigation of Mechanical and Physical Properties of ABS Specimen Developed by Manual Injection Moulding and Fused Deposition Modelling,” in Lecture Notes in Mechanical Engineering, 2021, pp. 965–978.

• M. Q. Tanveer, A. Haleem, and M. Suhaib, “A Comparative Study on the Effect of Process Parameter on Mechanical and Physical Properties of ABS Specimen Developed by Hand Moulding and Open Source 3 D Printer” Proceeding of International Conference on Advances in Science & Technology 2018 (ICAST2018) held by Swami Keshvanand Institute of Technology, Management & Gramothan, Jaipur, May 4, 2018

• M. Q. Tanveer, R. C. Saini, M Sharma, R. Kumar, R. Rana, “Design Development of Front Suspension Shocker Mounting of XYZ vehicle”, Page No. 148-160, Proceeding of National Conference on Computer Aided Design and Technology (NCCADT2012), Maharaja Agrasen Institute of Technology, Delhi, April 21, 2012
• M. Sharma, M. Q. Tanveer, R. C. Saini, N. Solanki, R. Rana, “Simulation and Analysis of Counter Pressure Hydroforming Process”, Page No. 161-171, Proceeding of National Conference on Computer Aided Design and Technology (NCCADT2012), Maharaja Agrasen Institute of Technology, Delhi, April 21, 2012
• R. Kumar, A. K. Dahiya, R. C. Saini, M. Q. Tanveer, “Interpretive Structural Modelling (ISM) Analysis of Factors Affecting Implementation of Lean Manufacturing” , Page No. 197-203, Proceeding of National Conference on Computer Aided Design and Technology (NCCADT2012), Maharaja Agrasen Institute of Technology, Delhi, April 21, 2012

Areas of Interest: