S. Mishra, S. Varshney, L. Nayal, R. Kumar, P. Chaudhary (2022), "Performance Analysis Of Shell And Tube Heat Exchangers Using Al2 O3 Nano-Fluid A Review", IPEC Journal of Science & Technology, pp. 21-25.
A.P. Singh, A. Tripathi, A. Nagar, H. Choudhary (2022), "Design and Fabrication of CNC Laser Engraver using Microcontroller: A Review", IPEC Journal of Science & Technology, pp. 26-20.
H. A. Khan, A. Tiwari, J. Kaushik, M. Yadav, B. C. Kandpal (2022), "The Next Era of Manufacturing the Future: Making things in a changing world", IPEC Journal of Science & Technology, pp.31-39.
Vaibhav Gangwar, Hari Singh & Sudhir Kumar (2021), “Influence of Process Parameter on Microstructure, Residual Stress, Microhardness and Porosity of AA-6063 Microwave Cast”, International Journal of Metalcasting (https://doi.org/10.1007/s40962-021-00638-z), SPRINGER, IMPACT FACTOR – 1.808 (SCI)
S. Kumar, K. Kumar, M. Maurya, Vishal (2021), “Parametric optimization of friction stir processing on micro-hardness of Al/B4C composite”, International Journal of Materials Research, (https://doi.org/10.1515/ijmr-2020-8027)
M. K. Yadav, D. Gambhava, L. Kumar, S. P. Singh (2021), “A novel approach of inspection methodology in fabrication industry post COVID-19”, Journal of Physics: Conference Series, 012063, pp. 1-7. (https://doi:10.1088/1742-6596/2007/1/012063) , SCOPUS
N. Johri, B. C. Kandpal, N. Kumar, A. Srivastava (2021) “Effect of ply thickness and orientation on fatigue delamination of laminated composites using cohesive zone model”Materials Today: Proceedings Vol. 46, Part 20, pp. 11040-11045. (https://doi.org/10.1016/j.matpr.2021.02.156)
B. C. Kandpal, N. Johri, N. Kumar, A. Srivastava (2021), “Effect of industrial/ agricultural waste materials as reinforcement on properties of metal matrix composites” Materials Today: Proceedings Vol. 46, Part 20, pp. 10736-10746, 2021. (https://doi.org/10.1016/j.matpr.2021.01.575)
S. Singh, V. Kumar, S. Kumar, A. Kumar, “Variant of MIG weld of similar and dissimilar metals – A Review”, Materials Today: Proceedings, Science Direct, 2021. (Article in Press) (https://doi.org/10.1016/j.matpr.2021.11.287)
K. Sharma, H. K. Rai, A. P. Singh (2021), “Optimization of gear and bending stress analysis”, International Journal of Human-Computer Interaction, pp. 1-7.(SCOPUS)
K. Sharma, H. K. Rai, A. P. Singh (2021), “Gear Defects & Corrective Measures”, International Journal of Human-Computer Interaction, pp. 1-13. (SCOPUS)
V. K. Jain, M. K. Yadav, A. N. Siddiquee, Z. A. Khan (2021), “Optimization of friction stir processing parameters for enhanced microhardness of AA5083/Al-Fe in-situ composites via Taguchi technique”, Material Science, Engineering and Applications, Vol. 1, Issue 2, pp. 55-61 (https://doi.org/10.21595/msea.2021.22179)
L. Kumar, A. Haleem, M. Javaid (2021), “Impact of three dimensional printing in orthopedics, Global Health Journal, 5 (2021), pp.178-182 (https://doi.org/10.1016/j.glohj.2021.11.009)
S. P. Singh, A. Singh (2021), “Developing smart agriculture using blockchain for the prosperity of farmers in India”, Shodhsamhita, Vol. 8, Issue2, ISSN 2277-7067, pp. 27-36 (National Journal, UGC Care Group 1).
V. K. Jain, M. K. Yadav, A. N. Siddiquee, Z. A. Khan (2022), “Fabrication of surface composites on different aluminium alloys via friction stir process - A review report”, Australian Journal of Mechanical Engineering, Taylor & Francis. (https://doi.org/10.1080/14484846.2021.2022577)
S. Kumar, A. Kumar (2021), “Joining of AA7075/SiC Composite using friction Stir welding”, Industrial Transformation: Implementation and Essential Components and Processes of Digital Systems, CRC Press, Taylor & Francis, (Book Chapter)
K. Nafees, M. Q. Tanveer, A. Mahendru, A. P. Singh (2021), “A Computational Technique to Generate Coupler Curve Equation of 6-bar Mechanism”, Smart Innovation, Systems and Technologies (Book series), Vol. 239, pp. 349-356. (https://doi.org/10.1007/978-981-16-2857-3_34), SPRINGE
N. Johri, B. C. Kandpal, (2021), “Fatigue Analysis of FRP Laminate Composites”, Lecture Notes on Multidisciplinary Industrial Engineering (Book series), pp. 247-258. (https://doi.org/10.1007/978-3-030-73495-4_17 ), SPRINGER
N. Johri, B. C. Kandpal, (2021), “Study of Microstructure, Mechanical and Fracture Properties of Bagasse Ash Powder Strengthened Aluminium Matrix Composites”, Lecture Notes on Multidisciplinary Industrial Engineering (Book series), pp. 453-460. (https://doi.org/10.1007/978-3-030-73495-4_31 ), SPRINGER
A. Dixit, H. K. Rai, D.K. Bhalla, "Effect on Air-Fuel Ration of two Wheeler Vehicle at Higher Altitudes", International Journal of Scientific and Engineering Research (IJSER)-11(ISSN 2229-5518), June, 2020
B. C. Kandpal, D. K. Gupta, A. Kumar, A.K. Jaisal, A. K. Ranjan, AnkitSrivastava, P. Chaudhary, "Effect of heat treatment on properties and microstructure of steels", Materials Today: Proceedings Elsevier Publication, Sep 2020 (https://doi.org/10.1016/j.matpr.2020.08.556)
N. Kumar and S. Varshney , "Reliability Based Design Of Two Repairable System", International Journal Of Engineering Research & Technology (IJERT), 11 November 2020.
A. Bhardwaj, A. Vats, N. S. Rathore, N. Kumar, N. Johri, B. C. Kandpal , K. Bhardwaj, A. Srivastava, "To study the effect of drilling process parameters on glass fiber reinforced composite", Materials Today: Proceedings 26 (2020) 2333-2336. (https://doi.org/10.1016/j.matpr.2020.02.502)
K. Kumar, A. Sharma, A. Bharti, A. Bansal, A. Kumar, B. C. Kandpal , N. Ramdas, "Machining response in turning stir cast aluminium alloy based metal matrix composite", Materials Today: Proceedings 18 (2019), 2619-2624, 2019.
M. K. Yadav , A. N. Siddiquee, Z. A. Khan, "Characterization of Ti–Al Intermetallic Synthesized by Mechanical Alloying Process", Metals and Materials International (2019). https://doi.org/10.1007/s12540-019-00603-w
M. Q. Tanveer , M. Suhaib, A. Haleem, "A New 3D Benchmarking Artifact to Evaluate Dimensional Accuracy and Geometric Tolerancing of Additive Manufacturing Technique", Recent Advances in Mechanical Engineering, Springer, Singapore, pp.261-273, 25-Jan-20
M. Q. Tanveer , M. Suhaib, A. Haleem, "Geometrical Benchmarking evaluation of ProJet 3D printer using proposed simplified 3D Artifact", Engineering Research Express 1 (2019) 025037, 2019. (https://doi.org/10.1088/2631-8695/ab577b)
M. Q. Tanveer , A. Haleem, M. Suhaib, "Effect of Variable Infill density on Mechanical Behaviour of 3-D Printed PLA Specimen: An Experimental Investigation", SN Applied Sciences, (2019) 1:1701, (https://doi.org/10.1007/s42452-019-1744-1)
P. Kumar, S. Sharma, B. C. Kandpal , "Synthesis and mechanical characterization of biomass fly ash strengthened aluminium matrix composites", Materials Today: Proceedings 26 (2020) 266-272. (https://doi.org/10.1016/j.matpr.2019.11.236
B. C. Kandpal , J. Kumar, H. Singh, "Optimization of electrical discharge machining AA6061/ 10 %Al2O3 composite using Taguchi optimization technique", Materials Today: Proceedings 5 (2018) pp. 18946-18955.
D. K. Gupta , R. Kumar and N. Kumar, "Performance analysis of PTC field based ejector organic Rankine cycle integrated with a triple pressure level vapor absorption system (EORTPAS)", Engineering Science and Technology, an International Journal https://doi.org/10.1016/j.jestch.2019.04.008
M. K. Yadav , A. N. Siddiquee, Z. A. Khan, "Fabrication of promising material 'titanium aluminide': methods and issues (a status report)", Materials Research Express 5 (2018), pp. 1-17.
Subhash Mishra , Prakash Mishra, Pradeep Barnwal , J. Kumar, H. Singh, "Thermal aspect comparison of mud wall construction as compared to brick wall construction in India", ISST Journal of Mechanical Engineering Vol. 9 No. 1-2, pp. 5-9.
Uma Yadav, Harshit Gupta, Hemant Mishra, D. K. Bhalla , "Role of Encoders and PLC in Electrical Control Drives of CNC Machines and Automation", Journal of Digital Intergrated Circuits in Electrical Devices, Vol. 3, Issue 2, pp. 1-4.
C. Kandpal , J. Kumar, H. Singh, "Manufacturing and technological challenges in Stir casting of metal matrix composites - A Review", Materials Today Proceedings (Elsevier), 5 (5), 2018.
C. Kandpal , J. Kumar, H. Singh, "Optimization of electrical discharge machining AA6061/ 10 %Al2O3 composite using Taguchi optimization technique", Materials Today: Proceedings 5 (2018) pp. 4413-4420.
K. Rai , "Applications of Nano Technology Based on Iron Oxide", International Journal of Advance Research in Science & Engineering, Vol. 06, No. 06, 2017.
K. Rai , "An Easy Approach to Synthesize Iron Oxide Nanoparticles", IEEE International Conference on Science, Technology, Engineering and Management (ICSTEM-17), KIT, Coimbatore, Taminadu, India, 3-4th March 2017.
Nafees , "Dimensional synthesis of Watt-II mechanism based on twenty-four precision points path generation", International Journal of Engineering Sciences & Research Technology, Vol. 7, No. 2, 2018, pp. 319-327.
Nafees , "Approximate dimensional synthesis of Watt-I mechanism based on twenty precision points path generation", International Journal of Emerging Technologies in Engineering Research, Vol. 6, No. 2, 2018, pp. 115-120.
Nafees , "Dimensional synthesis of eight-bar mechanism based on path generation", International Journal of Current Advanced Research, Vol. 7, No. 2(I), 2018, pp. 10246-10250.
Nafees , "An Analytical, Lagrange's Interpolation Technique for the Use in the Analysis of a 4-Bar Mechanism Coupler Curve Equation", International Journal of Applied Engineering Research, Vol. 13, No. 11, pp. 9831-9834. (UGC Index)
C. Kandpal , H. Singh, J. Kumar, "Fabrication and characterisation of Al2O3/aluminium alloy 6061 composites fabricated by Stir casting", Materials Today (Elsevier), Volume 4, Issue 2,2017, pp. 2783-2792.
K. Nafees , Aas Mohammad, "Dimensional synthesis of a planar five-bar mechanism for motion between two extreme positions", Australian Journal of Mechanical Engineering, Taylor & Francis, 2017, pp. 1-8.
A Sur , R. K. Das, "Experimental investigation on waste heat driven activated carbon-methanol adsorption cooling system", Journal of the Brazilian Society of Mechanical Sciences and Engineering (Accepted), SCI Index impact factor 0.98
K. Das, A. Sur , "An overview of modelling techniques employed for performance simulation of low-grade heat operated adsorption cooling systems", Renewable and Sustainable Energy Reviews, 74, 2017, pp.364–376, SCI Index impact factor 3.120
A Sur , R. K. Das, "Design, Fabrication and Experimental study of an Adsorption Refrigeration System", Thermal science, DOI:10.2298/TSCI160108254S, SCI index Impact factor 1.45
K Nafees and A Mohammad, "Optimal dimensional synthesis of six-bar Stephenson I mechanism for path generation, Int. J. Mech. Engg. & Tech., Vol. 7, Issue 6, 2016, pp.535-546.
N Bhadouria , L Thakur, P Kumar, N Arora, "An Investigation of Normal and Submerged Condition on Microstructural and Tribological properties of Friction Stir Processed AZ91-D Magnesium Alloy", Canadian metallurgical quarterly, Taylor & Francis, 2016, DOI: 10.1080/00084433.2016.1270394
N Bhadouria , P Kumar, L Thakur, S Dixit, N Arora, "A Study on Micro-hardness and Tribological Behaviour of Nano-WC-Co-Cr/Multi-walled Carbon Nanotubes Reinforced AZ91D Magnesium Matrix Surface Composites", Transactions of the Indian Institute of Metals, Springer, 2017, DOI: 10.1007/s12666-017-1111-0
D K Bhalla , O P Singh, et al "Modeling and Analysis of MPTT Control Techniques for Grid Connected PV Generation," Published in International Journal "Advanced Research in Electrical and Electronic Engineering", p-ISSN: 2349-5804; e-ISSN: 2349-5812 Volume 3, Issue 4, July-September, 2016, pp. 324-330
Vineet Kumar, Lalit Kumar , Abid Haleem, "Rapid Prototyping Technology Ranking using an ANP Approach and its Sensitivity Analysis", International Journal of Engineering Sciences & Research Technology (IJESRT), ISSN: 2277-9655, Volume 05, Issue 9 (September-2016), PP 93-103, DOI: 10.5281/zenodo.61471.
Vineet Kumar, Lalit Kumar , Abid Haleem, "Selection of Rapid Prototyping Technology Using an ANP Based Approach", International Journal of IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), e-ISSN: 2278-1684, p-ISSN: 2320-334X, Volume 13, Issue 4 Ver. VI (Jul. – Aug. 2016), PP 71-78, DOI: 10.9790/1684-13040647178.
Arpit Rastogi, Lalit Kumar , "Quality Factors in Education System", International Journal of R&D in Engineering, Science and Management, ISSN 2393-865X , pp.143-148, Vol.4, Issue 3, July 2016.
A Sur , R. K. Das, "Review of Technology Used to Improve Heat and Mass Transfer Characteristics of Adsorption Refrigeration System", International Journal of Air-Conditioning and Refrigeration 24(2), 2016 1630003-1-11.
A Sur , R.K.Das, "Thermal analysis of a Silica gel methanol adsorption refrigeration system", Journal of The Institution of Engineers (India): Series C Springer. (Accepted)
A Sur , R. K. Das, "Dynamic Heat and Mass Transfer Analysis of an Adsorption Refrigeration System", Thermal science Serbia (Accepted)
Bhaskar Chandra Kandpal , et.al., "Investigations into Electrical discharge machining of fabricated AA 6061/ 10% Al2 O3 aluminium based metal matrix composite using OFAT approach", International journal of Automotive composites. (Accepted)
Bhaskar chandra kandpal , et.al., Production and testing of AA6061/Al2O3particulate reinforced composite by stir casting method, International journal of scientific research (IJSR),volume 4,Issue 10, Oct. - Dec., 2015.
Bhaskar chandra kandpal , et.al., Machining of aluminium metal matrix composites with electrical discharge machining - A Review, Material today, Elsevier journal, Scopus indexed, 2015, pp 1665- 1671.
Subhash Mishra , "Energy conservation for mud wall construction in India by the application of insulation" International Journal of Scientific Research and Engineering Studies, Vol.2, issue 2, February 2015, pp.6-12, ISSN No: 2349-8862.
Subhash Mishra , "Potential for energy conservation in Mud Wall building" International Advanced Research Journal in Science, Engineering and Technology (IARJSET), Vol.2, issue 1, May 2015 pp.28-32, ISSN No: 2393-8021.
Lalit Kumar , Vineet Kumar, Abid Haleem, Design and Development of Thermal Rapid Prototyping Machine and Its Application, "International Journal of Emerging Technologies in Engineering Research (IJETER), ISSN 2454-6410, pp. 101-106, Volume 4, Issue 2, Feb. 2016.
Lalit Kumar , Vineet Kumar, Mohd. Javaid, Abid Haleem,Rapid Prototyping Technology for New Product Development, "International Journal of Innovative Science Engineering and Technology (IJISET)", ISSN 2348 – 7968, pp.287-292, Vol.3, Issue 1, Jan.2016.
Lalit Kumar , Vineet Kumar, Mohd. Javaid, Abid Haleem, Product Design and Development using Polyjet Rapid Prototyping Technology International Journal "Control Theory and Informatics", ISSN 2224-5774 (Paper) ISSN 2225-0492 (Online) pp12-19, Vol.5, No.3, 2015.
Devendra Kumar Gupta , "Thermodynamics Analysis of a Solar Operated Combined Power and Ejector Cooling Cycle with Environmentally Benign Fluids" Journal of Basic and Applied Engineering Research, Vol. 2 (12), 2015, pp. 1009-1012.
A. Sur , R. K. Das, "Numerical Modeling and Thermal Analysis of an Adsorption Refrigeration System", International Journal of Air-Conditioning and Refrigeration, 23 (4), (2015) 15500331-11.
A. Sur , R. K. Das, "Review of Technology Used to Improve Heat and Mass Transfer Characteristics of Adsorption Refrigeration System", International Journal of Air-Conditioning and Refrigeration (2016). DOI: 10.1142/S2010132516300032.
A. Sur , "Analysis of an Evaporative Desiccant Cooling System Journal of Refrigeration", Air Conditioning, Heating and Ventilation 2(2), 2015.
A. Sur , "Experimental Analysis of A Portable Solar Water Distillation System" in the Journal of Water Resource Engineering and Management Journal of Water Resource Engineering and Management 2(3) 2015.
A. Sur , "Analysis of an Evaporative Desiccant Cooling System Journal of Refrigeration", Air Conditioning, Heating and Ventilation 2(2), 2015.
A. Sur , "Experimental Analysis of A Portable Solar Water Distillation System" in the Journal of Water Resource Engineering and Management Journal of Water Resource Engineering and Management ISSN: 2349-4336 2(3), 2015.
N. Jauhari , R. Mishra, H. Thakur, "Stress analysis in FRP composites", Elsevier-Perspectives in Science (2016), http://dx.doi.org/10.1016/j.pisc.2016.03.004.
N. Jauhari , R. Mishra, H. Thakur, "Natural Fibre Reinforced Composite Laminates- A Review", Elsevier- Materials Today: Proceedings 2 (2015) 2868 - 2877.
Khalid Nafees , Aas Mohammad, "Synthesis of a planar five-bar mechanism consisting of two binary links having two offset tracing points for motion between two extreme positions", Journal of Mechanisms and Robotics, Volume 8 (4), pp. (DOI: 10.1115/1.4032910)
Sh. Om Prakash Singh , D.K Bhalla, "Simulink Model of Solar Module for PV Power Generation System', Advanced Research in Electrical and Electronic Engineering, p-ISSN: 2349-5804, e-ISSN: 2349-5812 Volume 3, Issue 1 January-March, 2016, pp. 41-46.
Rajesh Kumar Singh, Ayush Gupta, Ashok Kumar , Tasmeem Ahmad Khan "Ranking of barriers for effective maintenance by using TOPSIS approach", Journal of quality in Maintenance Engineering, volume 22, No. 1, pp. 18-34, 2016. (Pub: Emerald)
Bhaskar chandra kandpal , et.al., Production technologies of metal matrix composites – A Review, International Journal of Research in Mechanical Engineering & Technology, Vol. 4, Issue 2, Spl- 2 May – October 2014, pp. 27-32.
Subhash Mishra , "Energy conservation in different walls construction in India by the application of insulation" International Journal of Engineering Sciences & Research Technology, Vol.3, issue 4, April 2014, pp.6064-6072, ISSN No: 2277-9655.
Devendra Kumar Gupta , "First and Second Law Analysis of Solar Operated Combined Rankine and Ejector Refrigeration Cycle" International Journal of Applied Solar Energy, Vol. 50 (2), 2014, pp. 113-121.
A. Sur , R. K. Das, "Thermodynamics analysis of an adsorption refrigeration system at adsorption equilibrium", Journal of Refrigeration, Air conditioning, heating and ventilation, 1(1), (2014), pp 30-37.
A. Sur , R. K. Das, "Thermodynamics analysis of an silicagel water adsorption refrigeration system, Journal of Refrigeration", Air conditioning, heating and ventilation, 2(1), (2014), pp. 24-29.
Bhaskar chandra kandpal , et.al., Manufacturing of AMMC using stir casting process and testing its mechanical properties, International journal of advanced engineering technology(IJAET), ISSN 0976-3945, Volume IV, Issue III, July–September, 2013, pp. 26-29.
O.P. Sharma , Nilesh Ramdas, "Design of a Muffler & Effect of Resonator Length for 3 Cylinder SI Engine" International Organization of Scientific Research Journal, Volume 1, Issue 3, May-2014.
Subhash Mishra , "Analysis of energy saving for external walls using different energy sources". International journal of Engineering Science and Management (IJESM), Vol.3, issue 2, Jul-Dec 2013, pp. 34-41, ISSN No : 2231-3273.
Subhash Mishra , "Comparison of embodied energy in different masonry wall materials", International Journal of Advanced Engineering Technology (IJAET), Vol.4, issue 4, Oct-Dec, 2013, pp.90-95,ISSN No: 0976-3945.
Subhash Mishra , "Study on energy saving in residential building using life cycle cost analysis" International Journal of Engineering and Sciences(IJES),Vol.4, issue 1, Jul-Dec 2013, pp.8-17, ISSN No: 2319 – 4545.
Subhash Mishra , "Energy conservation in mud house as compared to brick wall building in India", International Journal of Advanced Engineering Research and Studies(IJAERS) Vol.3, issue 2, Jan-Mar 2013, pp.151-156, ISSN No: 2249-8974.
Devendra Kumar Gupta , "A Thermodynamic Analysis of a Hydrogen Enriched Compressed Natural Gas Fuelled HCCI Engine" International Journal of Applied Engineering Research, Vol. 8, 2013, pp. 2051-2056.
Devendra Kumar Gupta , "First and Second Law Analysis of a Solar Operated Ejector Absorption Refrigeration System" International Journal of Applied Engineering Research, Vol. 8, 2013, pp. 1963-1968.
Devendra Kumar Gupta , "Thermodynamic Analysis of a Absorption Refrigeration Cycle Using Flat Plate Collector" International Journal of Applied Engineering Research, Vol. 8, 2013, pp. 2017-2022.
Devendra Kumar Gupta , "Study The Importance of Insulated Combustion Chamber With & Without Catalyst Inside The Combustion Chamber on The Performance of Four Stroke C.I. Engine" IJERT, Vol. 1, Aug. 2012.
A. Sur , R. K. Das, Thermal analysis of Silica Gel-Methanol adsorption refrigeration system International journal of Mechanical Engineering and Research, 3 (2013), 231-235.
Ashok Kumar , Rajesh Kumar Singh, Tasmeem Ahmad Khan, "Analyzing the barriers for implementation of TPM", 5th-6th September2013,ISTE Delhi Section held at DTU, Delhi.
Shailendra Pratap Singh , George Phlip and Saurabh Kumar Singh (2014), "Effect of Condenser Vacuum on Performance of a Reheat Regenerative 210 MW Fossil-Fuel based Power Plants",International Journal of Emerging Technology and Advanced Engineering (ISSN 2250-2459), Vol. 4 (1), p.p.190-195.
Shailendra Pratap Singh , K.C. Yadav and George Phlip (Jan-Jun 2014), "Title Effect of Flue Gas Exhaust Temperature on Boiler Performance of a Typical 210 MW (LMZ) Thermal Power Plant", ISST Journal of Mechanical Engineering (ISSN : 0976-7371), Vol.5(1).
Shailendra Pratap Singh and Vijay Kumar Dwivedi (February 2014), " Exergy Analysis of the Turbine for a Reheat Regenerative 210 MW Fossil-Fuel based Power Plants in India", International Journal of Current Engineering and Technology (ISSN 2277 – 4106), Vol.4(1), p.p. 160-164.
P. K. Barnwal, A. P. Singh, S. Mishra, N. Kumar, S. Joshi, V. Tiwari, (2021), “Development Of Mathematical Model Of Chiller System Considering Pressure As Well As Heat Losses Using C++ Programming”, Second International Conference on Mechanical and Energy Technologies (ICMET-2021), October 28-29th, 2021, Galgotias College of Engineering & Technology, Greater Noida, Uttar Pradesh, India.
B. C. Kandpal (2021), “Development & Characterisation of LM6/Al2O3/SiC/Graphite Metal Matrix Composites using IOT based Mechanical Stir Casting Process”, Second International Conference on Industrial & Manufacturing Systems (CIMS-2021), November 11-13th, 2021, Punjab Engineering College, Chandigarh & Dr B R Ambedkar National Institute of Technology, Jalandhar, India.
A. Rastogi , "On-grid system evaluation for EV charging stations using renewable sources of energy", IPRECON-2020 An IEEE sponsored International Conference, 28th Oct. 2020 to 1st Nov. 2020.
B. C. Kandpal , "Effect of industrial/ agricultural waste materials as reinforcement on properties of metal matrix composites" "International conference on Industrial and Manufacturing Systems (CIMS-2020)", NIT Jalandhar, 9-11 Oct 2020
H. K. Rai , S. Mishra and P. Barnwal , "Potential For Energy Saving In Mud Wall Construction", International Conference on Optimization Techniques and Recent Innovations in Mechanical Engineering (ICOTRIME-2020), KEC, Ghaziabad, IOP, 11-12 Dec-2020
K. Roy , "Analysis Of Variation Of Load Analysis Of Power Plant Combining The Rankine Cycle With Vapour Absorption Chilling Systems" RANKINE 2020 conference at University of Glasgow- Scotland, 26 June 2020
M. Q. Tanveer , "A Retrospective Investigation of Mechanical and Physical Properties of ABS Specimen Developed by Manual Injection Moulding and Fused Deposition Modeling", International Conference on Emerging Trends in Electromechanical Technologies and Management (TEMT-2019), HMR Institute of Technology & Management, Hamidpur, Delhi, 26-27th July 2019
N. Ramdas , "Micro-pocket Formation on DELRIN by optimizing the parameters of Abrasive Jet Machining (AJM)", National Conference on Mechanical & Automation Engineering (MAAE-2020), Ajay Kumar Garg Engineering College, Ghaziabad, 7-8th Februrary 2020.
S. Mishra , H.K. Rai, P. Barnwal, "Energy Saving Analysis for Optimum Insulation Thickness of Different Insulating Materials", International Conference on Innovative Technologies in Mechanical Engineering (ITME-2019), KIET, Ghaziabad, 18-19th October 2019.
S. P. Singh , "An AHP (Analytic Hierarchy Process) based Multi-Criteria Evaluation and Priority Analysis for Best FWH Substitution of Solar-Thermal Power Plant", International Conference on Mechanical & Energy Technologies (ICMET-2019), Galgotias College of Engg. & Tech., Greater Noida, 7-8th November 2019.
S. P. Singh , "Identify the Rational Performance and Effect of End State Temperature of A Regenerative-Reheat Coal Based Thermal Power Plant in India", International Conference on Innovative Technologies in Mechanical Engineering (ITME-2019), KIET, Ghaziabad, 18-19th October 2019.
U. Yadav, A. Gupta, H. K. Rai, D. K. Bhalla , "Mitigation of Harmonic Current in Grid Connected Solar Power System", International Conference on Innovative Technologies in Mechanical Engineering (ITME-2019), KIET, Ghaziabad, 18-19th October 2019.
A. Rastogi , A. Digalwar, Shobhit Jain, "Sustainability Assessment of Diesel & Electric Buses A Case Study", 12th Annual ISDSI Conference, SPJIMR, Mumbai, December 2018.
B. C. Kandpal , "Fabrication & Characterization of Glass Fiber/SiC Reinforced Polymer composite", International Conference on Recent Trends and Innovations in Mechanical Engineering (ICRTIME-2018), KIET Group of Institutions, Ghaziabad, July 2018.
H. K. Rai , "Solar Energy Harvesting Using Nanotechnology", International Conference on Recent Trends and Innovations in Mechanical Engineering (ICRTIME-2018), KIET Group of Institutions, Ghaziabad, July 2018.
K. Nafees , "Generation of Coupler Curve Equations for a 4-Bar Mechanism Using Lagrange- Polynomial", International Conference on Recent Trends and Innovations in Mechanical Engineering (ICRTIME-2018), KIET Group of Institutions, Ghaziabad, July 2018.
M. Q. Tanveer , "A new 3D benchmarking artifact to evaluate dimensional accuracy & geometric tolerances of additive manufacturing technique", 1st National Conference on Advances in Mechanical Engineering-2019, NIT Delhi, March 2019.
R. Rathore , "Application of Lean Six Sigma in Healthcare Sector- A review", 4th Global Leadership Research Conference (GLRC-2019), ABS, Noida, 27-28th Feburary 2019. The paper was published in conference proceedings, CASS STUDIES, ISSN No. 2581-6403 (UGC Approval No. 40934).
B. C. Kandpal , D. Kumar, "A Review of Abrasive Jet Machining: Advanced Approaches", International conference on computational and experimental methods (ISBN:978-93-86171-85-6) in mechanical engineering (ICCEMME- 2017), GL. Bajaj Institure of Technology, Greater Noida, December 2017.
B. C. Kandpal , J. Kumar, H. Singh, "Performance parameters optimization of electric discharge machining of AA 6061/10%Al2O3 AMMC using utility concept" International conference on nanotechnology (ICN: 31-2017), IIT Roorkee, December 2017.
H. K. Rai , "An easy approach to synthesize Iron Oxide Nanoparticles", IEEE International Conference Science, Technology, Engineering and Management (ICSTEM-17), KIT - Kalaignarkarunanidhi Institute of Technology, Tamilnadu, India, March 2017.
S. Varsheny , N. Upadyaye "Hear Transfer for enhancement by using Nanofluids in shell & tube heat exchanger", International Conference of Advance Research & Innovations (ICARI-2018), Institution of Engineers, Delhi State Justify, New Delhi, January 2018.
F Husain , A N Siddiquee, Z A Khan and N Z Khan, "Friction Stir Welding of Dissimilar Aluminum Alloys", International conference and exhibition and building utilities (ICEBU-21016), Department of mechanical engineering, Jamia Millia Islamia, New delhi, December 2016.
P Kumar, N Bhadouria , L Thakur, N Arora, "A Study of Tribological Performance of Al2O3/ Multi-walled Carbon Nanotubes Reinforced AZ91D Magnesium Matrix Surface Composites Fabricated by Friction Stir Processing" International conference on the Emerging Trends in Materials and Manufacturing Engineering, NIT Trichy, Tamil Nadu, India, 2017.
Sunil, V Kumar, A Mahendru , "State of Art solar distillation technique in India: An Overview", National Conference on Sustainable Engineering practices in material, water and energy technologies, BRCM CET Bahal, Haryana, March 2017.
Khalid Nafees , Aas Mohammad, "Dimensional synthesis of six-bar Stephenson II linkage for fifteen precision points path generation", International Conference on Recent Trends in Engineering and Material Science held at Jaipur National University on 17-19th March 2016.
N. Jauhari , R. Mishra, H. Thakur, "Failure Analysis of Fiber-Reinforced Composite Laminates", International Conference on Materials Processing & Characterization (ICMPC)-13th March 2016, Hyderabad, India.
Devendra Kumar Gupta , "Fabrication of permanent mould casting and testing of aluminium alloys casted using sand and die casting" was presented and published in proceedings of International conference & exhibition on cutting edge technological challenges in Mechanical engineering CETCME - 2015 held at NIET , Greater Noida, Utter Pradesh on 21- 22 March 2015.
Khalid Nafees , Aas Mohammad, "A Review on Dyadic and Triadic Dimensional Synthesis Methods of Planar Kinematic Linkages with Variable Topology", International Conference & Exhibition On Cutting edge Technological Challenges in Mechanical Engineering, held at Greater Noida, India on 21st March 2015.
Khalid Nafees , Aas Mohammad, "Dimensional Synthesis of Mechanisms - A Review", International Conference On advancements in Mechanical Engineering held at Al-Falah University, Faridabad, India on 7th August 2014.
Khalid Nafees , Aas Mohammad, "Investigation on Readability Task under the Varying Level of Text / Background Color and Font Sizes", International Conference On advancements in Mechanical Engineering held at Al-Falah University, Faridabad, India on 7th August 2014.
Manoj Yadav and Neha Chaudhary , "Artificial Intelligence: An Aid to Supply Chain Management", International Conference on Manufacturing Excellence (MANFEX 2013) held in 30-31, May, 2013, Amity University, Noida.
Lalit Kumar, Arpit Rastogi , "Implementation of Sustainable Manufacturing in Small Scale Indian Industries", National Conference on Sustainable development (GSDIG 2014)held at IPEC Ghaziabad 14-15 February 2014, ISBN 978-81-929040-0-9, pp 263-269.
Lalit Kumar , Vineet Kumar, AbidHaleem, "Rapid Prototyping: New Technology for Product Development", National Conference on Emerging Technologies in Mechanical Engineering (NCETME-2014) held at Echelon Institute Faridabad, 24-25th Jan 2014, ISBN 978-93-83842-05-6, pp 30-35.
Devendra Kumar Gupta , "Machining Capability of Non-Conventional Machining Methods-A Review", National Conference on Recent Advances in Mechanical and Civil Engineering (RAMCE-2014), held on 04-05 April 2014 at AKGEC, Ghaziabad (U.P.).
A Sur , R. K. Das, Thermal analysis of Silica Gel-Methanol adsorption refrigeration, World Congress on Frontiers of Mechanical Aeronautical and Automobile engineering 2nd and 3rd February 2013, IIT Delhi (India) .
A Sur , R. K. Das, Analysis of a continuous activated carbon methanol adsorption refrigeration system, International Conference on Advances in Mechanical Engineering, May 29th-31st 2013, College of Engineering Pune, Maharashtra (India).
A Sur , R. K. Das, Thermodynamic analysis of adsorption refrigeration system, International conference on Smart Technologies for Mechanical Engineering, Oct 25th - 26th 2013, Delhi Technological University (formerly Delhi College of Engineering) Delhi, (India).
N. Jauhari , R. Mishra, H. Thakur, "Fracture Mechanics Basics & Analysis", Conference On Emerging Trends In Engineering & Sciences (ETES-2013), Haridwar, 9-10 Nov. 2013.
Shailendra Pratap Singh , "Efficiency Control Parameters for 210 MW Coal Fired Thermal Power Plant", International Conference on Emerging trends and development in Science, Management and Technology, ICETDSMT-2013, Raj Kumar Goel Institute of Technology, Ghaziabad.
Shailendra Pratap Singh , "Efficiency of Thermal Power Plant based on Efficiency Defects on Different Ambient Temperatures for 210 MW Unit", International conference on Emerging trends and development in Science, Management and Technology, ICETDSMT-2013, Raj Kumar Goel Institute of Technology, Ghaziabad.
Virtual Tour